---
title: "Which paint sticks to plastic?"
description: "Any paint, provided an adhesion promoter goes on first — and on polypropylene or polyethylene, the promoter is not optional. The ranked options, the technique that c"
url: https://atoneplace.net/which/paint-plastic/
site: "At One Place"
---

# Which paint sticks to plastic?

**Which paint sticks to plastic?: Any paint, provided an adhesion promoter goes on first — and on polypropylene or polyethylene, the promoter is not optional.**

Painting plastic is the same wetting problem as gluing it. Polypropylene and polyethylene have surface energies too low for coatings to wet, so paint sits on top as a skin and flakes at the first knock; ABS, PVC and polycarbonate are far more receptive but still benefit from a promoter. Identifying the plastic therefore comes first, and the recycling code moulded into the part is the quickest route — codes 2, 4 and 5 are the difficult ones. The second issue is mould release agent, which is still on many mouldings and must be washed off with detergent and then solvent-wiped. Flexibility matters too: a rigid paint on a flexing bumper cracks, which is why automotive systems include a flex additive.

## The options, ranked

*Ranked best-first for the stated job. The third column is why the others exist.*

| Option | Good at | Bad at |
| --- | --- | --- |
| Adhesion promoter plus acrylic topcoat | The professional sequence, and the only reliable way to paint bumpers, trim and garden furniture. | Two products, and the promoter has a limited recoat window. |
| Plastic-specific spray paint | Primer and colour in one can for garden chairs and small items. | Thin film, limited colours, and still fails on polyolefins without a promoter. |
| Two-pack flexible topcoat | The durable option for automotive plastics that flex. | Contains isocyanate hardener — spraying it needs an air-fed respirator, not a cartridge mask. |
| Vinyl wrap | No adhesion chemistry to worry about, reversible, and consistent finish. | Requires clean, smooth surfaces and some skill, and edges lift over time. |

## Technique that changes the outcome

1. Identify the plastic from its recycling code before buying anything
2. Wash with detergent to remove release agents, rinse, then wipe with isopropanol
3. Key the surface with a fine abrasive pad or 320-400 grit
4. Apply adhesion promoter and topcoat within the recoat window stated on the can
5. Test on a hidden area, especially with aerosols, since some solvents attack the plastic

## What goes wrong

- Painting polypropylene or polyethylene without an adhesion promoter
- Skipping the degrease; mould release is the usual reason paint lifts
- Spraying two-pack paint without air-fed respiratory protection — isocyanates are a respiratory sensitiser

> Compiled practical guidance rather than a published standard. Product formulations vary by brand and market, so read the label — and where the work is structural, electrical or gas, the regulations that apply where you are govern rather than anything here.

## Other paint questions

| For | Use |
| --- | --- |
| Previously painted wood | Clean it, key it and spot-prime bare areas — and find out first whether the existing paint is oil or water based. |
| Bare wood | Knotting solution on the knots, a wood primer, then your topcoat — and prime end grain twice. |
| Kitchens | A scrubbable acrylic eggshell or satin on the walls — and for cabinets, degrease, prime and use a proper cabinet enamel. |
| Bathrooms | A moisture-resistant acrylic in a satin or eggshell sheen with a mould inhibitor — but ventilation, not paint, is the actual fix. |
| Metal | Remove the rust, apply a rust-inhibiting primer the same day, then an alkyd or a direct-to-metal acrylic. |
| Ceilings | A flat matt emulsion — and if there is a water stain or nicotine, seal it with a shellac-based stain block first. |
| Tiles | Tile paint over an epoxy or adhesion primer on a thoroughly degreased and abraded glaze — and expect a limited life in a shower. |
| Fences | A penetrating stain or fence treatment rather than a film-forming paint — and let new pressure-treated timber weather first. |
| Floors | Two-pack epoxy on concrete after a moisture test and a proper grind; floor-grade varnish or floor paint on timber. |
| Radiators | A radiator enamel — water-based acrylic ones no longer yellow, which ordinary gloss on a hot surface always will. |
| Exterior masonry | A breathable mineral or masonry paint — and on an old solid wall, breathability matters more than any durability claim. |
| Galvanised metal | A mordant wash, a self-etch primer or a purpose-made acrylic primer for galvanising — ordinary oil-based primer peels off in sheets. |
| UPVC | A uPVC-specific paint or an adhesion promoter with an acrylic topcoat — and avoid dark colours, which can distort the frame. |

## Common questions

### Which paint sticks to plastic?

Any paint, provided an adhesion promoter goes on first — and on polypropylene or polyethylene, the promoter is not optional.

### What should I avoid?

Painting polypropylene or polyethylene without an adhesion promoter Skipping the degrease; mould release is the usual reason paint lifts Spraying two-pack paint without air-fed respiratory protection — isocyanates are a respiratory sensitiser

## Related pages

- [Which paint goes over previously painted wood?](https://atoneplace.net/which/paint-painted-wood/)
- [Which paint should I use on bare wood?](https://atoneplace.net/which/paint-bare-wood/)
- [Which paint should I use in a kitchen?](https://atoneplace.net/which/paint-kitchen/)
- [Which paint should I use in a bathroom?](https://atoneplace.net/which/paint-bathroom/)
- [Which paint should I use on metal?](https://atoneplace.net/which/paint-metal/)
- [Which paint should I use on a ceiling?](https://atoneplace.net/which/paint-ceiling/)
- [Which paint can I use on tiles?](https://atoneplace.net/which/paint-tiles/)
- [Which paint should I use on a fence?](https://atoneplace.net/which/paint-fence/)
- [Which paint should I use on a floor?](https://atoneplace.net/which/paint-floor/)
- [Which paint should I use on radiators?](https://atoneplace.net/which/paint-radiators/)
- [Which glue works on plastic?](https://atoneplace.net/which/glue-plastic/)
- [Which drill bit should I use for plastic?](https://atoneplace.net/which/drill-bit-plastic/)
- [Which sandpaper grit for plastic?](https://atoneplace.net/which/sandpaper-plastic/)
- [Which screw should I use in plastic?](https://atoneplace.net/which/screw-plastic/)

## Sources

- Typical range compiled from manufacturer specifications — At One Place (/about/)